News
-
Introduction to the types of cold room doors
As the heart of the cold storage, the cold room door is a very important part. Cold room doors have different types according to different requirements, the following Linble will briefly introduce for you. Cold room doors according to the nature of the cold storage held ...Read more -
How many degrees should the temperature of the cold storages be kept at
Temperature requirements vary according to the type and use of cold storage. Linble will introduce you to how many degrees should the temperature of the cold storages be kept at. Different types of cold storages temperature ranges: 1.Constant temperature freezer room tem...Read more -
How to install a cold storage sliding door
The quality of a cold storage installation depends to a large extent on the installation of the door. It is the throat of the cold storage, the cold room door is also the main part of the management. Linble will show you how to install a sliding door with high quality. 1...Read more -
Analysis and methods of low-pressure alarm for cold storages
Cold storages and low-pressure alarms are one of the most common problems in cleaning staff work and there are numerous reasons for this. Here are some thoughts on low-pressure alarm calibration that may be useful to you! 1. The pipeline for the refrigeration system's co...Read more -
5 Benefits Of Polyurethane Cold Room Panels
Polyurethane panel has a variety of uses in construction and engineering due to its excellent advantages. Next LINBLE will introduce five distinct advantages of cold room polyurethane panels. 1. Energy-saving and heat preservation Rigid polyurethane has low thermal condu...Read more -
Things To Consider When Choosing and Designing Cold Room Doors
Cold room doors, one of the cold storage equipment, usually only account for less than 10% of the cost of the whole system. After the whole system is put into use, it almost becomes the “facade” of the whole system, and workers will walk through the doors up to 1,000 tim...Read more -
3 Ways To Extend The Service Life Of Cold Room Panels
Cold room panels are indispensable in cold storage equipment, but they also have limited life span. Linble will next offer you three practical ways to extend the life of the cold room panel. 1. Select the right material ● Polyurethane foam insulation layer The heat insul...Read more -
Tips To Use and Maintain Cold Storage Rolling Shutter Doors and Their Benefits
Roller shutter cold room doors are commonly seen in industrial or commercial settings where large areas must be chilled and kept cool, but where traffic is high, making it necessary for a specialist door system that will keep the temperature down but will not impede traf...Read more -
Why Choose Polyurethane Panels for Cold Room Construction
Most cold room manufacturers choose polyurethane panel to build the cold room. Do you know why do they prefer polyurethane sandwich panels? LINBLE, an international cold chain integration supplier of research, production and sales, will talk about some benefits of PU pan...Read more -
Components Of Condensing Unit and Troubleshooting Procedures
Components of a condensing unit 1. Compressor It plays the role of compressing and driving the refrigerant in the refrigerant circuit. The compressor extracts and compresses the refrigerant from the low pressure area, sends it to the high pressure are...Read more -
How do ground thermal insulation for cold room
Ground thermal insulation is an important factor during cold room construction. There are differences methods for ground thermal insulation practices among large, medium and small cold room. ...Read more -
Cold storage installation basics and considerations
Cold storage is a low-temperature refrigeration equipment. The installation of cold storage is very important. Poor installation will cause many problems and failures, and even increase the cost of cold storage and greatly reduce the service life of the equipment. ...Read more
